AMPEX ATR 100 series Parts for Sale


 


I have a SMALL selection of used ATR 100 series parts
generally in very good condition and usually FULLY TESTED
unless otherwise stated...

 
BUT.... I am RUNNING OUT OF CARDS QUICKLY   !!!
Email us here to order
NOTE: we have a HEAVY Spam block on our mail...
you must put the word Ampex or MCI or Studer or Otari into the subject line !!!





Just in... A COMPLETE Ampex ATR 102
ONE INCH Transport Conversion Kit     !!!!

CONVERT YOUR 1/4 MACHINE to a two track 1 INCH     !!!
does NOT include headstack....




Brand NEW ATR 100 series PARTS !!!
 

 

Capstan Tach Assembly


  made by Athan   New Polyurethane unit
Complete with Precision Mounted Glass Disc Encoder
Finest grade made

We NO LONGER STOCK THIS PART...
Purchase them directly from Athan on their eBay Store :
Athan eBay Store Link



NOTE: You will have to hire a good EXPERIENCED tech to install a new Capstan unit
into your ATR machine.... as they need mechanical and electronic alignment -
which can be difficult to do even for an experienced tech   !!!!

 




 
AMPEX HEADS
 
Jump over to the Tape Recorder Heads page here...


Tape Heads in Stock and for Sale



 
 
 
======================================================


HIGH-QUALITY USED ATR 100 Series PARTS



 
take a look at the list below and see if I've got the parts you need!


 




ATR 100 series Audio I/O Module
Looks Great and works great !   Good but slightly faded VU meter
Normally these cost $ 500 per unit !!!
    Current Sales Price     your cost: SOLD

Picture above is NOT the unit in stock - the units left in stock have a faded Red portion of the VU meter !!!

 



ATR 100 series COMPLETE POWER SUPPLY
Yep. a COMPLETE power supply - transformer, voltage regulator card, all the trimmings !!!
this beast is HEAVY so shipping will be costly.... but if your power supply has repeatedly
gone bad, this is the most cost-effective way to bring it back to normal spec
Estimated Shipping weight is 45 pounds !
Was taken out of a working ATR 102 - but has NOT BEEN TESTED for a few years now.
Thus it will be sold STRICTLY "As-IS" - with NO RETURN !!!


    Cost:  SOLD 

 


 



ATR 100 series Reel Motor
Used but Runs fine - very nice unit   !!!

    Cost:  On Sale     200.00  

 



ATR 100 series Tension Arm Sensors
These are the lower units -
    Cost: $ 90
 



 
  DOUBLE 'Y' cable assembly
for Control box - Search to Cue - MPSTC

allows you to add a Remote control unit or
a Multi-Point Search to Cue unit to your machine...
This unit was Custom manufactured by Ampex for Film studios -
and allows you to connect up to 4 extra Items   !!!!
 On Sale     200.00  

 


 
ATR 100 series TRANSPORT AND AUDIO CARDS :
 
ALL REMAINING AMPEX ATR 100 SERIES TRANSPORT AND AUDIO CARDS
were SOLD - the last one left was sold in 2023 !!!!


Sorry !   Studios in Europe and the USA have bought ALL of my last remaing stock of
Ampex ATR 100 series cards... none left as of December 2023.    

NONE   LEFT !!!
 



 

Pics of various ATR 100 series Parts I've SOLD...

Just for viewing.... NO LONGER AVAILABLE !!!

ATR 100 Control Box
can be also used as a remote control by installing an extension cable
Good quality used Control unit.... looks fine, buttons all work and feel like new!
      List for a normal used one   $ 400 - 495    
the last one I have !!
    your cost:   SOLD
Has minor folds in the clear plastic overlay... Works fine !




Ampex ATR REMOTE CONTROL BOX with about 15 feet of cable   !!!
Someone extended a Remote with short cable by just cutting the cable and soldering in
an extension cable - not eligant in ANY way   (they didn't even shrink-warp the extensions)
But it works just fine.     The Control Box also looks very good.
You install this along with the local machine's Control Box in the #1 connector,
in the #2 Connector position.   Both Local and Remote controllers work together.
    SOLD   


   


ATR 100 series Multi-Point Search to Cue Remote Cable !!!
VERY RARE !!!


Ampex Assembly part number: 4050894-02
this is a CUSTOM MADE CABLE - not the original Ampex cable.
use this to connect up the Ampex Multi-Point Remote unit to your ATR 100 !!
SOLD



ATR 100 series   ROLL-AROUND   STAND - COMPLETE UNIT   !!
This is a COMPLETE Roll-Around Stand....
The Stand itself and the 2 mounting brackets that go on the transport
Cost $ SOLD     Pics left up for documentation

       
Note this is heavy and large, shipping costs will be somewhat high   !!!
Unit CAN be taken apart for easy shipping.... but it IS large and heavy !

 

 


Email us here to order
NOTE: we have a HEAVY Spam block on our mail...
you must put the word Ampex or MCI or Studer or Otari into the subject line !!!


 
 

 


 

------ Other AMPEX ATR 100 series Parts Suppliers ------
 
If I don't have what you need...

The ONLY people I know of who have a better selection of ATR 100 parts are
the folks at ATR Service...

 
Links to all are below....
Tell them 'Goreski' send you!!!

For Ampex ATR 100 series Head Relapping

email John Austin from Sprague Magnetics

 
for Head Relapping
talk to John Austin... and tell him 'Goreski' sent you !
NOTE: you MUST REMOVE the "X" in .comX in the email address !!!

 

For Ampex ATR 100 series Parts


ATR Service

 

  .. and tell them Goreski at AnalogRules.com sent you !

 

 

 


>>>>>NOTE that prices and stock are ALWAYS subject to change....



  =============================================

    head back to the AnalogRules.com main page