Use the email link at the bottom of this page to order parts...
OTARI MTR 10 and MTR 12 series Tape Recorder Parts NEW PARTS !!!!
Athan Pinch Rollers
>>> NEW - New stock - polyurethane (the best!)
much better than the Otari original !!!
Original Otari part # KP0A29S or KP0A028S
We NO LONGER STOCK Athan Pinch Rollers...
Purchase them directly from Athan on their eBay Store :
| Athan eBay Store Link |
NEW - UNUSED 1/4 inch 2 track ERASE HEAD
This is the upgraded Otari head made for Otari
by JVC as used in the MTR 10 and MTR 12 series machines
Exact replacement head. One head left !
Cost: $175.00
NEW Otari Switches and Switch Parts
Toggle Switches - just ONE left of each !!!
Otari Part # WH41024W 3 position with White cap $40.00
Otari Part # WH41023R 2 position with RED cap $40.00
Otari Switch # WH1122B square black switch $25.00
MTR 10 and 12, and MX70 and MX 80 Transport Switch LAMP UNITS with CAP
Otari Part # WH11117
three WHITE one RED one BLUE left in stock $25.00 each
Cap and Lamp unit only - NO SWITCH
OTARI MTR 10 and MTR 12 series Tape Recorder Parts Very Good USED PARTS !!!!
Slightly USED 1/4 inch 2 track RECORD HEAD
This is the ORIGINAL Otari head made for Otari MTR 10 and 12.... will also work in the 5050 series machines.
Very little use on this head.
Cost: $150.00
Slightly USED 1/4 inch 2 track ERASE HEAD
This is the ORIGINAL Otari head made for the Otari MTR 10 and 12..... will also work in the 5050 series.
Very little use on this head.
Cost: $150.00
Good used 5050 Repro head, fine for use in MTR 10 and MTR 12 machines
This is the original 5050 Otari head... these were also used in the MTR 10 and 12.
About 50% or more head life left. Has not been lapped.
Should be relapped before you install it... but will work fine without lapping..
Cost: $150.00
Another Good used 5050 Repro head, fine for use in MTR 10 and MTR 12 machines
This is the original 5050 Otari head... these were also used in the MTR 10 and 12.
About 50% or more head life left. Has not been lapped.
Should be relapped before you install it, but will work fine without lapping..
Cost: $140.00
WE have a number of MTR 10 and MTR 12 Audio cards.
2 are set up for 2 track 1/2 head machines 2 are set for normal 2 track 1/4 inch heads
and we have ONE Time Code Audio card.
All are USED CARDS that appear to be in fine condition.... BUT I have no way to test these cards,
as I haven't had an MTR 10 or 12 come into my shop since I bought these cards along with other parts.
So these cards will be sold strictly 'As-Is' and 'untested'. Cost: $ 135 - $250 each
Should be able to work with MTR 10 I or MTR 12 I machines
Move Mouse over the pictures for a larger view !!! takes a couple seconds to enlarge....
MTR 10 - 12 Time Code Card (Used card - UNTESTED) Cost: $ 200.00
Move Mouse over the pictures for a larger view !!! takes a couple seconds to enlarge....
| Email us here to order |
you must put the word Ampex or MCI or Studer or Otari into the subject line !!!
|
|