Use the email link at the bottom of this page to order parts...
OTARI 5050 series Tape Recorder Parts NEW PARTS !!!!
1/4 and 1/2 inch Athan Pinch Rollers
>>> NEW - New stock made with polyurethane (the best!)
much better than the Otari original !!!
We NO LONGER STOCK Athan Pinch Rollers...
Purchase them directly from Athan on their eBay Store :
| Athan eBay Store Link |
Otari 5050 Stereo Balanced Output Transformer Assembly card with Transformers !!!
Good Used unit with Cables
Make your Unbalanced Outputs fully BALANCED Outputs - better sound
Cost: 175.00
Requires Soldering to your Existing Output XLRs (easy to do !)
has wires with connector to connect to the Audio Motherboard for varous 5050's.
And has wires that you connect to your Existing XLR Male Output Connectors
Mounts on the lower rear pannel near the XLRs
Some 5050 versions may require other minor soldering
Move Mouse over the pictures for a larger view !!! takes a couple seconds to enlarge....
MANY 5050's have UNBALANCED XLR Outputs - pin 3 hot, Pins 1 and 2 grounded.
NEW - UNUSED 1/4 inch 2 track ERASE HEAD
This is the upgraded Otari head made for Otari
by JVC as used in the MTR 10 series machines
Exact upgrade for the 5050 BQII, MKII-2, BF, B2HD, MKIII-2, and MTR 10 and 12 machines.
One head left !
Cost: $175.00
Brand New Otari Brake Bands part number: KW-4E-A
for the 5050 series machines Only ONE left as of 09/10/2025 !!!
Cost: $ 75.00
Move Mouse over the pictures for a larger view !!! takes a couple seconds to enlarge....
5050 Transport Switches Otari part # WH11007 for 5050 BII
Brand New Parts ! Cost: $35.00 3 left !
These ARE the Stop, Play, FF and Rewind, and Record Switches...
Move Mouse over the pictures for a larger view !!! takes a couple seconds to enlarge....
These are NOT the On/Off, Tape Speed, Reel Size or Edit switches !
Otari CPU I-0012
Used in 5050 machines.... 3 good used IC's LEFT in stock !!!
Cost $ 100.00 each
Move Mouse over the pictures for a larger view !!! takes a couple seconds to enlarge....
OTARI 5050 series Tape Recorder Parts
Very Good USED PARTS !!!!
VERY VERY Slightly USED 1/4 inch 2 track ERASE HEAD
This is the upgraded Otari head made for Otari
by JVC as used in the MTR 10 series machines
Exact upgrade for the 5050 BQII, MKII-2, BF, B2HD,
MKIII-2 machines. Very little use on this head.
Cost: $125.00
Good USED Original 1/4 inch 2 track REPRODUCE HEAD
This is the original 5050 series Otari head
About 50% or more head life left. Has not been lapped.
Should be relapped before you install it, but works fine as it is..
Cost: $110.00
Another Good used 5050 REPRO Head, fine for use in MTR 10 and MTR 12 machines
This is the original 5050 Otari head... these were also used in the MTR 10 and 12.
About 50% or more head life left. Has not been lapped.
Should be relapped before you install it, but will work fine without lapping..
Cost: $110.00
Slightly USED MTR 10 1/4 inch 2 track RECORD HEAD
This is the ORIGINAL Otari head made for Otari MTR 10 and 12.... will also work in the 5050 series machines.
Very little use on this head.
Cost: SOLD
Slightly USED MTR 10 1/4 inch 2 track ERASE HEAD
This is the ORIGINAL Otari head made for the Otari MTR 10 and 12..... will also work in the 5050 series.
Very little use on this head.
Cost: $135.00
|
Otari 5050 VU Meters
>>> Good Used Condition! go to the VU Meters Webpage ! All VU Meters are tested before shipping... 5050 VU Meters are listed in the VU Meters webpage - so go check that out ! LINK: Otari VU Meters !!! |
|
|||||
We also have various parts from some Parts machines.... but NO knobs or Button Caps left !!!
| Email us here to order |
you must put the word Ampex or MCI or Studer or Otari into the subject line !!!
|
|