QUALITY New and USED Ampex MM 1200 Parts...

 


If you own a MM 1100 or a MM 1200 Ampex Recorder, go here to see my recommended list of spare parts you should have.
Go To Spare lists
 
To Order Parts use the email link at the bottom of this page...
 

AMPEX   MM 1200     NEW PARTS !!!!


 

2 inch Pinch Rollers


  >>> NEW - New stock - polyurethane (the best!)   $ 200.00
       comes with bearings.
        Precision Mastering-Grade units     Custom Manufactured for us

 

           

 



  2 inch MM 1200 or MM 1100 Tape Lifter Sleeve   >>> NEW - new stock !!!   $ 125.00 each
Precision Mastering-Grade units   Custom Manufactured for us

 

  Tension Bar   >>> NEW - ORIGINAL AMPEX STOCK !!! for MM 1200 and MM 1100   $ 100.00
original Ampex part       Yours WILL break sooner or later !!!

 

  2 inch Tape Roller Guides  >>>NEW - new stock !!!   ON SALE !! was $ 450.00 NOW $ 175.00   !!!
Precision Mastering-Grade units     Custom Manufactured for us

 

  MM 1200 Tension Control Card   with Take-up Boost       $ 250.00
BRAND NEW - AMPEX ORIGINAL STOCK - unused
for machines with the Ampex Constant Take-up Tension Card

 

 Of COURSE we sell the wonderful Brand New   FLUX Magnetics   heads for the MM 1200...
    and often we can sell them at a discount too !!!
 

 

  Jump to our Current Stock and Prices for AMPEX MM 1200 IC's
Obsolete and damn near impossible to find  !!

 

  All the other Ampex - New - Old Stock - parts and Cards have been SOLD !!
 


AMPEX   used - great condition - 2 Inch Tape Recorder Parts

MM 1200 parts:

2 inch Ampex MM1200 Capstan Motor     Worked great when pulled from service.   A steal at 475 bucks! !
 
 
AMPEX Remote Cable
- very rare - fully tested in good condition (about 15 feet in length)     $ 400.00
 
 
AMPEX Remote Counter unit for MM1100 and MM1200 tape decks
      cable about 15 feet in length -   has Cue and Search buttons and tape timer display       $ 225.00

 


AMPEX MM1200 Transport Cards (used)

Capstan Servo Card

Capstan Servo Card (without crystal)

Transport Control Card (MM 1100) no take-up boost  can mod for 1200 use

Transport Control Card with take-up Boost (MM 1200)

Counter / Search-To-Cue Card

Stationary 2 inch tape guides  $50  

2 inch Roller guides (used)  all sold ! 

2 inch Tape Roller Guides NEW - new stock !!!  $450.00    SALE !   $ 175.00 

2 inch Pinch Rollers  NEW - New stock - polyurethane (the best!)   200.00

2 inch Pinch Rollers - used but still OK -  all sold !

2 inch MM 1200 Tape Lifter Sleeve NEW - new stock !!! 125.00 each

Tension Bar NEW - Original Ampex Stock !!!  for MM1200    $100  

Transport Switches  (new) for MM1200   none left for sale - sorry !! 
   I called the manufacturer of the original Ampex transport Switches
   and they'll make more new switches at a cost of $ 225.00 PER SWITCH!
   When my stock is gone that's it... you'll have to mod your machines to 
   take other kinds of switches.... and it ain't gonna be easy!		


Audio relays: You must use a special relay for the Sync/Repro relay 
                           for all MM 1200 and MM 1100 recorders...  $ xx.00 each 
                     oops, now we're out of them again!

Ampex PURC Bias cards  - for gapless punch-ins!  8 left  !!   $100.00  

AMPEX MM1200   Audio Cards (used)


MM 1200 Audio Switcher Card  (no relays included) only 2 left !!   $125  

Record Card    no EQ insert  

Repro Card     no EQ insert  has 199 xmfr (15 / 7.5 ips)  

Repro Card     no EQ insert  has 044 xmfr (30 / 15 ips)   

PURC Bias cards  - for gapless punch-ins!  4 left  !!   $100  

Record Card EQ insert (15 / 7.5 ips)

Repro Card EQ insert    very few left

Repro Card head transformers (044) for 30/15 ips card conversions   $20  

MM 1200 VU meter  (new!!) none left   SOLD  

MM 1100 VU meters - can use in MM1200's (face color very slightly different)  $75   


Ampex Miscellanious stuff:


 



AMPEX Remote Counter unit for MM1100 and MM1200 tape decks
      cable about 15 feet in length
  has Cue and Search buttons and tape timer display
      $ 225.00
 

AMPEX HEADS (used )

We also sell BRAND NEW heads for Ampex recorders...


16 track Ampex head  VERY GOOD CONDITION, unused since re-lapping !  
      2 left   $ 500.00 each !!!  SOLD !!!  

24 track head.  not-re-lappable.  Very worn but works.... 
      and very cheap !!!  $ 175.00 !!!  SOLD ! 

COMPLETE AMPEX 24 track headstack - for MM1100 and MM1200 tape recorders
        about 10 - 15% life left on the heads, good condition
                   $ 750.00 for the comeplete headstack

                   


AMPEX PARTS in "not-so-good shape"....

   These were parts that  unqualified people worked on - people 
traded these in when they ordered good working cards.  The 
quality of their workmanship is poor... and I have NOT fixed these
cards.   These cards are great for parts, or fixing yourself.....
They are all sold "AS-IS" without warantee or guarantees of any kind!!!




MM 1200 Counter / Search-To-Cue card:  Lots of sockets,
	 not all ICs on board. NOT TESTED.  Looks Ok though....  $65  

MM 1100 Transport Control Card.  Poor quality repairs made by someone...  
	3 wire-wrapped sockets installed, modified for 8 pin 741 IC.
	  Card works Ok !!!   Can mod for MM1200 use! $100  

MM 1100 Transport Control Card.  Poor quality repairs by someone.  
	Has some sockets, missing a few parts.  Looks fully repairable. Can mod for MM 1200 use.
	  NOT TESTED   $50   




AMPEX OBSOLETE ICs......VERY LIMITED STOCK

 Getting impossible to find anywhere....  
These are  NEW - OLD STOCK - UNUSED IC's
    Since IC's are easily damaged these ICs are NOT returnable.   
      We are ONLY selling these in an AS-NEEDED basis for you own repairs...

     NOTE THAT THESE ICs ARE EXPENSIVE - they're OBSOLETE!!
They haven't been made for years and years... and are extreemly hard to find.  
  
MC 846		MC 668		MC 665		MC 680		MC 661

     U6A9950 (cap servo)		MC 853 (cap servo)		

 
 

  Jump to our Current Stock and Prices for
AMPEX MM 1200 IC's

Obsolete and damn near impossible to find  !!

 
 



 
Email us here to order
NOTE: we have a HEAVY Spam block on our mail...
you must put the word Ampex or MCI or Studer or Otari into the subject line !!!

 

    head back to the AnalogRules.com main page